Vultr CentOS6 部署 PPTP + L2TP/IPSec 一键包教程

翻阅了N个一键包教程了，终于找到可以互相兼容的PPTP + L2TP/IPSec 一键包了。

本教程在 Vultr 测试成功。

一、安装 PPTP 一键包

首先，安装 PPTP 一键包

wget http://www.hi-vps.com/shell/vpn_centos6.sh
chmod a+x vpn_centos6.sh
bash vpn_centos6.sh

会有三个选择：

1. 安装VPN服务
2. 修复VPN
3. 添加VPN用户

输入1，全自动安装

二、安装 L2TP/IPSec 一键包

然后，安装 L2TP/IPSec 一键包

wget --no-check-certificate https://raw.githubusercontent.com/teddysun/across/master/l2tp.sh
chmod +x l2tp.sh
./l2tp.sh

全默认回车就行，全自动安装

安装完以后应该有错误如下

Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path [OK]
Linux Openswan U2.6.38/K2.6.32-504.23.4.el6.x86_64 (netkey)
Checking for IPsec support in kernel [OK]
SAref kernel support [N/A]
NETKEY: Testing XFRM related proc values [OK]
[OK]
[OK]
Hardware RNG detected, testing if used properly [FAILED]
Hardware RNG is present but ‘rngd’ or ‘clrngd’ is not running.
No harware random used!
Checking that pluto is running [OK]
Pluto listening for IKE on udp 500 [OK]
Pluto listening for NAT-T on udp 4500 [OK]
Checking for ‘ip’ command [OK]
Checking /bin/sh is not /bin/dash [OK]
Checking for ‘iptables’ command [OK]
Opportunistic Encryption Support [DISABLED]

很明显的错误

Hardware RNG detected, testing if used properly [FAILED]

然后谷歌一下解决办法：

1.安装rng-tools
yum install rng-tools
2.修改 /etc/sysconfig/rngd
EXTRAOPTIONS=”-r /dev/urandom”
3.chkconfig rngd on
4.service rngd restart

紧接着再次验证ipsec（L2TP）并重启相关服务，否则提示服务器无相应

ipsec setup restart
xl2tpd -D
ipsec verify

另外，纯净下安装以上功能以后的iptables的配置应该是类似这样的

# Generated by iptables-save v1.4.7 on Sat Nov 21 01:25:13 2015
*filter
:INPUT ACCEPT [1:40]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [1:140]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A INPUT -p icmp -j ACCEPT 
-A INPUT -i lo -j ACCEPT 
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT 
-A FORWARD -s 172.16.36.0/24 -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -j TCPMSS --set-mss 1356 
COMMIT
# Completed on Sat Nov 21 01:25:13 2015
# Generated by iptables-save v1.4.7 on Sat Nov 21 01:25:13 2015
*nat
:PREROUTING ACCEPT [1178:51788]
:POSTROUTING ACCEPT [91:8584]
:OUTPUT ACCEPT [91:8584]
-A POSTROUTING -s 172.16.36.0/24 -j SNAT --to-source 你.的.I.P 
-A POSTROUTING -j MASQUERADE 
COMMIT
# Completed on Sat Nov 21 01:25:13 2015

三、设置 PPTP + L2TP/IPSec 通用帐号

然后就是修改：/etc/ppp/chap-secrets里面的账号密码
结构为：

username * password *

这样，不管是L2TP还是PPTP都可以通用上面的帐号密码
但是注意的是L2TP要多填一个密钥就是了（默认密钥是vpn）

搞完手工，有问题请留言

实在搞不定，可以联系我有偿安装，详细看这里介绍~